|
|
|
|
 |
Steering Cable Extender 1"
|
|

Extend your steering cable easily with this extension. Made from 6061 aluminum and anodized for corrosion resistance.
Your Choice, M5x0.8 thread or M6x1.0 thread
|
|
 |
|
|
|
|
 |
Steering Cable Extender 2"
|
|

Extend your steering cable easily with this extension. Extends cable 2 inches. Made from 6061 aluminum and anodized for corrosion resistance.
Your Choice, M5x0.8 thread or M6x1.0 thread
|
|
 |
|
|
|
|
 |
Slop Free Cable End 5mm
|
|

Fits all steering cables with M5 x .8 threads. High quality stainless and teflon cable ends. They are a direct swap for all most steering cable ends. These will eliminate all slop from the ball and socket ends that came with your ski from the factory.
|
|
 |
|
|
|
|
 |
Slop Free Cable End 6mm
|
|

Fits all steering cables with M6 x 1.0 threads. High quality stainless and teflon cable ends. They are a direct swap for all most steering cable ends. These will eliminate all slop from the ball and socket ends that came with your ski from the factory.
|
|
 |
|
|
|
|
 |
Billet Steering Nut
|
|

This is an all aluminum steering nut for Kawasaki steering cables. They are anodized for corrosion resistance, and use a 19 mm wrench to remove and install.
|
|
 |
|
|
|
|
 |
Billet Bottom Plate for Kawasaki Start Stop Housing
|
|

Tired of your cracked up bottom plate on your SXR style start stop housing? This is our billet replacement. Made from 6061 aluminum and anodized for corrosion resistance. This will last. Your choice of silver or Black.
|
|
 |
|
|
|
|
 |
Billet Bottom Plate for Kawasaki Start Stop Housing With Bilge Holder
|
|

Tired of your cracked up bottom plate on your SXR style start stop housing? This holds the standard universal bilge switches. This is our billet replacement. Made from 6061 aluminum and anodized for corrosion resistance. This will last. Your choice of silver or Black.
|
|
 |
|
|
|
|
 |
Kawasaki 440-550 Hull Saver
|
|

Finally, a way to easily save that old 550 hull with a rusted out steering cable mount. This is made to replace the rusted out fitting at the back of the hull. All you have to do is remove the old one including all the rusted pieces, prep the area and bond this in there tight. This is made to work on the 750 pump conversion as well.
Save that old 550 hull!!
|
|
 |
|
|
|
|
 |
Squirrel Cage Pushrod for 93-95 X2
|
|

Take the slop out of your 91-95 Kawasaki X2. This is a direct replacement for the squirrel cage pushrod on later model X2's. Made from anodized aluminum and stainless.
|
|
 |
|
|
|
|
 |
X2 Billet Squirrel Cage
|
|

This will work on all years Kawasaki X2 with a squirrel cage steering. Made from anodized aluminum and stainless for corrosion resistance. This part has multiple adjustments for steering throw and features collars on the main shaft you can adjust to eliminate any side to side motion. These are made to take abuse and replace the weak original part.
|
|
 |