|
|
|
|
 |
Fuel Line Restrictor .030
|
|

Fuel line restrictor is installed in the return line from the carburetor to the tank. This raises the fuel pressure in the system, a necessity when using a remote fuel pump. Size is .030"
|
|
 |
|
|
|
|
 |
Carb Brace Top Mount Dual Carbs
|
|

Carb brace for dual Mikuni carbs. Mounts to the Two holes on the top of the carb. Made from 6061 aluminum and anodized for corrosion resistance. Comes with all hardware. Available in 104mm spacing for early dual carb manifolds, or 117mm-120mm spacing for Standard Yamaha and Kawasaki spacing
|
|
 |
|
|
|
|
 |
Mikuni Fuel Pump Block Off
|
|

Fuel pump block off for Mikuni carbs. This is needed when running a remote fuel pump. Made from billet 6061 aluminum and anodized for corrosion resistance. Comes with instalation hardware as well.
|
|
 |
|
|
|
|
 |
Carb Brace Top Mount TrippleCarbs
|
|

Carb brace for tripple Mikuni carbs. Mounts to the Two holes on the top of the carb. Made from 6061 aluminum and anodized for corrosion resistance. Comes with all hardware. Available in 104mm spacing for early dual carb manifolds, or 117mm-120mm spacing for Standard Yamaha and Kawasaki spacing
|
|
 |
|
|
|
|
 |
Carb Brace Fuel Pump Mount Dual Carbs
|
|

Carb brace for dual Mikuni carbs. Mounts to the fuel pump housing. Perfect for aftermarket carbs that do not have the 2 top holes. Works with fuel pump block off plates as well. Made from 6061 aluminum and anodized for corrosion resistance. Comes with all hardware. Available in 104mm spacing for early dual carb manifolds, or 117mm-120mm spacing for Standard Yamaha and Kawasaki spacing
|
|
 |
|
|
|
|
 |
Keihin to Mikuni Carb Adapter
|
|

This allows you to run a Mikuni 44mm or 46mm carb on your stock Kawasaki 650-750 Keihin manifold. Comes with all hardware
|
|
 |
|
|
|
|
 |
Carb Brace Fuel Pump Mount Triple Carbs
|
|

Carb brace for triple Mikuni carbs. Mounts to the fuel pump housing. Perfect for aftermarket carbs that do not have the 2 top holes. Works with fuel pump block off plates as well. Made from 6061 aluminum and anodized for corrosion resistance. Comes with all hardware. Available in 104mm spacing for early dual carb manifolds, or 117mm-120mm spacing for Standard Yamaha and Kawasaki spacing
|
|
 |
|
|
|
|
 |
Yamaha 760 Intake speed plate
|
|

This allows you to convert your OEM Yamaha 64x intake to an o-ring setup. Never change gaskets again on your 64x intake. Available in 44mm, 46mm, 48mm and 50mm sizes Anodized 6061 aluminum and all stainless hardware
|
|
 |
|
|
|
|
 |
Yamaha 701 Intake speed plate
|
|

This allows you to convert your OEM Yamaha 62t intake to an o-ring setup.
Never change gaskets again on your 62t intake. Uses the stock mikuni 38mm carbs. Anodized 6061 aluminum and all stainless hardware
|
|
 |
|
|
|
|
 |
Speed Plate For Dual Dominator Manifold Yamaha
|
|

Tired of that horrible, leak prone custom gasket on your R&D Dominator manifold? Here is a true o-ring setup that just bolts on. Convert your Dominator manifold to o-rings, and never worry about the gasket again. Works for all Yamaha 2 cylinder Dominator manifolds. Anodized 6061 aluminum and all stainless hardware.
|
|
 |